2024 John Deere M Series Z930M
Features may include:
Powerful 25.5-hp (19.0-kW) commercial-grade engine delivers class-leading performance and efficiency
- More horsepower and torque per cubic inch of displacement
Available Mulch On Demand™ deck
- Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
- Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
- Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles.
- Deluxe comfort seat with armrests
- Deluxe comfort seat with armrests and isolation
- Fully adjustable suspension seat with armrests
Engine
Engine Manufacturer FX801V
Engine Power 25.5 hp (19 kW)
Rated Engine Speed Gross at 3,600 rpm
Cylinder Liners Two
Displacement 52 cu in (852 cc)
Lubrication Full pressure
Cooling Air
Air Cleaner Pre-cleaner Yes Heavy-duty canister type with safety element
Starter Operator presence starting system: Brake-N-Go (hand)
Fuel System
Fuel Type Gasoline
PTO
PTO Type Drive: V-belt | Electro-magnetic: 225 lb-ft (305 Nm)
Drivetrain
Drive System Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
Transmission Hydrostatic
Brakes
Brake System Type Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Hand brake
Wheels & Tires
Wheels Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
Front Wheel Anti-scalp rollers: RH, center, LH
Rear Wheel Anti-scalp rollers: Standard
Tires, Rear Specification 24x12-12 | Load rating: 4 PR
Battery
Battery 12 V
Electric
Electrical Cold cranking amp: 300 amp | Hour meter: Standard, digital
Charging System 20 amp
Operational
Operating Conditions Consumption: 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr )
Operating Speed Blade tip speed: 7Iron PRO: Approximately 18,500 fpm 152-cm (60-in.) FastBack: Approximately 16,500 fpm | Travel speed: Speed range: 0-10 mph (0-16.1 km/h) | Forward: 0-10 mph (0-16.1 km/h) | Reverse: 0-4.5 mph (0-7.2 km/h) | Blade tip speed: 7Iron PRO: Approximately 18,500 fpm | Speed range: 0-10 mph (0-16.1 km/h)
Hydraulics
Oil Filter Full flow, replaceable
Dimensions
Cutting Width 54 in (137 cm), or 60in (152cm)
Length 213 cm (84 in.)
Width With chute down: 68, 74 in (173, 188 cm) Rear discharge: 63.5 in (161.3 cm)
Height With ROPS up: 73 in (185 cm) With ROPS down: 47 in (119 cm) | Of-cut range: Increments: 0.25 in (0.64 cm) / 1-5.5 in (2.54-14 cm)
Dimensions Mower deck size: 54-in (137-cm) or 60-in (152-cm)| Blades Thickness: 0.25 in (0.64 cm)
Capacities
Hydraulic Capacity 5.9 U.S. qt (5.6 L)
Fuel Capacity Tank: 11.5 U.S. gal (43.5 L)
Features Crankcase capacity: With filter 2.4 U.S qt (2.3 L)
Weights
Weight 1,296 lbs to 1,383 lb (588 kg to 627 kg)
Features
Construction Material, Deck 7-gauge: 0.179-in (4.6-mm) one-piece forged steel
Features Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
Warranty
Warranty 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation