2024 John Deere X300 Select Series X350R
- 21.5-hp (16.0-kW) iTorque™ Power System
- 42-in. (107 cm) Edge™ Rear-discharge Deck
- Large capacity rear hopper easily emptied from operator seat
- 4 year/300 hour bumper-to-bumper warranty
Features may include:
Engine is smooth-running and reliable V-twin air-cooled design
The tractor is powered by a John Deere iTorque Power System, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.
A large 44.3 cu in. (726-cc), 21.5-hp (16-kW) engine has plenty of power and torque for superior performance. The larger, more powerful engine also allows the engine in the rear-discharge tractor to be operated at a lower 3100-rpm speed for quieter operation.
Key engine features include:
- Large 44.3 cu in. (726-cc) displacement
Quality features include:
- Cast-iron cylinder liners
- Full-pressure lubrication
V-twin design:
- Excellent power and performance
FLYWHEEL ALTERNATOR
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
- Regulated to keep the battery at full charge without risk of overcharging
FUEL TANK HAS LARGE, CONVENIENTLY LOCATED FILL OPENING
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy:
- Located on the left fender
- 2-U.S. gal. (7.6-L) capacity
- A low-fuel light is provided on the tractor dash to tell the operator when it is time to refuel.
42-in. (107-cm) Rear-Discharge Rear-Collect Mower Deck cuts clean
The innovative design of the 42-in. (107-cm) Edge™ Rear-Discharge Deck combines the best features for reliability and superior performance when mowing, collecting, and mulching grass and leaves:
- The mower deck is stamped from 11-gauge, 0.12-in. (3-mm) steel to provide smooth contours for a quality appearance and excellent performance.
- Easy to install or remove mulch plug is included as standard equipment.
- The included AM147289 blades provide optimal collection/rear discharge and good mulching results in many conditions. For optimal mulching, AM140332 mulching blades are available.
- With no side-discharge chute, the mower can trim on either side for mowing efficiency and convenience.
- A smaller storage area requirement is an additional benefit.
- A standard V-belt and non-timed blade design gives superior reliability and trouble-free operation.
- Offset mower blades permit blade overlap with the use of a standard V-belt drive.
- The blades cut cleanly without contacting each other.
- Cut-height increments of 0.25 in. (0.64 cm) allow for operating the mower at the optimum cutting height.
- An Exact Adjust deck-leveling system is provided to make keeping the deck properly adjusted easy.
The mower deck is contoured and free of obstructions to ensure optimum cutting and bagging performance:
- Grass clippings flow smoothly around the deck and up the chute into the hopper.
- Clipping buildup is minimized to ensure continued high-performance and easy cleanup.
Engine
Engine Power 21.5 hp (16.0 kW)
Engine Model: FR651V
Displacement 44.3 cu in. (726 cc)
Engine Type Overhead valve, full-pressure lube, oil filter
Cylinder Liners V-twin, cast-iron liners
Governor Mechanical
Cooling method: Air
Air Cleaner Dry, replaceable
Starter Bendix
Fuel System
Fuel Type Gasoline | Fuel tank location: Rear
Fuel System delivery: Pulse pump, carburetor
Fuel Gauge Type Low fuel indicator
Drivetrain
Choke speed control: Separate levers, automatic choke return
Steering Manual, sector and pinion
Drive System Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belt
Brakes
Brake System Type Internal wet disc
Wheels & Tires
Tires, Rear Specification 20x10-8
Tires, Front Specification 15x6-6
Wheels Mower: Three
Battery
Battery 12 V / 340 CCA
Charging System Flywheel alternator, regulated, 12 amp
Operational
Operating Speed Forward: 0-5.3 mph (0-8.5 km/h) | Reverse: 0-4 mph (0-6.4 km/h)
Chassis
Chassis mounting: Yes, heavy duty
Frame Type Welded heavy-duty
Lights and Safety
Lighting Headlights: Two standard, incandescent, 27 W
Safety Features Backup protection: Reverse Implement Option (RIO)
Dimensions
Dimensions Fuel fill opening On left fender: 3 in. (7.6 cm) | Steering wheel - Large: 14 in. (35.6 cm) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 6.6 in. (17 cm) | Mower deck material: 0.120 in. (11 gauge 3 mm) | Mower wheels rotate: 90 degrees for easy mower removal
Cutting Width Accel Deep™ mower deck: 42 in. (107 cm)
Turning Radius 16.5 in. (42 cm) | Uncut circle - Right: 23 in. (58.4 cm) / Left: 71.1 cm (71.1 cm)
Seat Height back: 15 in. (38 cm)
Height Mower cut: 1-4 in. (13 positions, 2.5-10.2 cm) | increments: 0.25 in. (0.64 cm ) | 46.1 in. (1171 mm)
Overall Length 97.2 in. (2468 mm)
Wheelbase 50.2 in. (1275 mm)
Width with mower: 43.8 in (1112 mm) | with mower (deflector raised for storage): 37.9 in. (1335 mm) | without mower: 38 in. (962 mm)
Capacities
Fuel Capacity tank: 2 U.S. gal. (7.6 L)
Towing Capacity Maximum: 600 lb (272 kg)
Weights
Weight 646 lb (293 kg)
Features
Features Transaxle type: K46 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, under seat and covered toolbox | Mower deck: Rear discharge, rear collect, mulch | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
Oil Type change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Internal, not replaceable
Construction Material Front axle: Cast iron front axle, front wheel ball bearings | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Stamped steel deck shell
Construction Material, Deck Fender: Stamped steel
Seat Type Open-back design with grasp | suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
Adjustability Mower wheel adjustment: Four-position, tool required | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
Warranty
Warranty 4 year/300 hour bumper-to-bumper